Do you find your factory car stereo a bit lacking when it comes to audio quality? If your vehicle is equipped with 4×6″ speakers, you’ve come to the right place. The aftermarket offers plenty of speaker options, many of which can replace your factory speakers with no additional power for a better listening experience. But shopping for the right speakers can be cumbersome, with a myriad of options and features. Here, we’ll explore great 4×6″ speaker options that are ideal factory replacements.

For more information on the best 4×6″ speakers, refer to our table of contents.

1. Editor's Pick: Rockford Fosgate Punch 4x6" 2-Way Full Range Speakers

rockford fosgate punch 4x6 2-way full-range speakers

Rated at 35-watts RMS or 70-watts max, these 4×6″ speakers are ideal factory replacements, offering impressive sound quality. They feature a Flex Fit basket for a better fit when installing, even in vehicles with oddly-shaped factory speaker locations. In addition, the integrated concealed crossover (ICC) eliminates the need to mount any black boxes. Providing accurate frequency reproduction and high volume output is a PEI dome tweeter located on each speaker. A rigid, lightweight, and high strength injection molded polypropylene cone helps minimize any cone flex, which improves overall sound quality while reducing potential distortion.

These speakers have 4-ohm impedance and frequency response is 90Hz to 22kHz. They require a mounting depth of 1.89″.

Product features:

  • Rated at 35-watts RMS / 70-watts max
  • Flex Fit basket offers better fit
  • Integrated concealed crossover
  • PEI dome tweeter
  • Injection molded polypropylene cone
  • Butyl rubber surround
  • Impedance: 4 ohm
  • Frequency response: 90Hz to 22kHz
  • Mounting depth: 1.89″

2. JBL Stage 4x6" 2-Way Coaxial Speakers

jbl stage 4x6" 2-way coaxial speakers

These 2-way 4×6″ speakers are rated at 70-watts RMS per pair and 210-watts max. The injection molded polypropylene cone is designed for superior rigidity and sensitivity, resulting in increased low-frequency output for richer sound. Each speaker also features a PEI balanced dome tweeter, offering increased power handling, efficiency, and reduced distortion. The result is spacious sound with a seamless transition between mid and high frequencies.

These are 4-ohm impedance speakers with a frequency response of 75Hz to 20kHz. They require 2″ top-mount depth.

Product features:

  • Rated at 70-watts RMS / 210-watts max
  • Injection molded polypropylene cone
  • PEI balanced dome tweeter
  • Impedance: 4 ohm
  • Frequency response: 75Hz to 20kHz
  • Top-mount depth: 2″

3. Pyle 4x6" Three-Way Speakers

pyle 4x6" three-way sound speaker system

These three-way triaxial speakers sport an attractive blue poly injection cone that offers plenty of stiffness without additional weight. They’re rated at 120-watts RMS and 240-watts max and feature a 1″ high temperature ASV voice coil that is ready for high-wattage situations. To keep the speakers secure is a non-fatiguing butyl rubber surround. Contributing to great sound quality is the 20-ounce magnet, 1″ neodymium film dome midrange, and 3/4″ piezo tweeter.

These speakers have 4-ohm impedance and frequency response is rated at 95Hz to 20kHz. They require a mounting depth of 1.75″.

Product features:

  • Rated at 120-watts RMS / 240-watts max
  • Three-way, triaxial speakers
  • Blue poly injection cone
  • 1″ ASV voice coil
  • Non-fatiguing butyl rubber surround
  • 20-ounce magnet
  • 1″ neodymium film done midrange
  • 3/4″ piezo tweeter
  • Impedance: 4 ohm
  • Frequency response: 95Hz to 20Khz
  • Mounting depth: 1.75″

4. Kicker CS Series 4x6" Speakers

kicker cs-series 4x6" speakers

Designed to be a simple, drop-in solution, these 2-way 4×6″ speakers feature a stamped-steel framework, rigid polypropylene cone, and Extended Voice Coil (EVC) technology. A UV-treated poly-foam surround resists heat or direct sunlight, while the large woofer magnet housed in a heavy duty motor delivers clean bass. Each speaker is equipped with a zero-protrusion, 1/2″ PEI tweeter that won’t interfere with factory grilles. The speakers are rated at 50-watts RMS and 150-watts max.

These speakers have 4-ohm impedance and frequency response is 50Hz to 20kHz. Top-mount depth is 5/16″, while bottom-mount depth is 1-11/16″.

Product features:

  • Rated at 50-watts RMS / 150-watts max
  • Stamped-steel framework
  • Rigid polypropylene cone
  • Extended Voice Coil (EVC) technology
  • UV-treated poly-foam surround
  • Large woofer magnet
  • Zero-protrusion, 1/2″ PEI tweeter with neodymium tweeter magnets
  • Impedance: 4 ohm
  • Frequency response: 50Hz to 20kHz
  • Top-mount depth: 5/16″
  • Bottom-mount depth: 1-11/16″

5. Skar Audio 4x6" 2-Way Coaxial Speakers

skar audio 4x6" 2-way coaxial speakers

Featuring a pulp fiber cone and butyl rubber surround, these 2-way coaxial speakers are rated at 60-watts RMS and 120-watts max. A powerful ferrite magnet, 1″ KSV copper voice coil, and premium 0.8″ silk dome tweeter help deliver crisp and clear audio. Designed to be ideal factory replacements, these speakers will sound great off your stock head unit, but also benefit from amplified power.

These are 4-ohm impedance speakers and frequency response is rated at 110Hz to 20kHz. They require 2.24″ mounting depth.

Product features:

  • Rated at 60-watts RMS / 120-watts max
  • Pulp fiber cone
  • Butyl rubber surround
  • Powerful ferrite magnet
  • 1″ KSV copper voice coil
  • 0.8″ silk dome tweeter
  • Impedance: 4 ohm
  • Frequency response: 110Hz to 20kHz
  • Mounting depth: 2.24″

We are committed to finding, researching, and recommending the best products. We earn commissions from purchases you make using the retail links in our product reviews. Learn more about how this works.

Photo credit: Alefat /